-
MasTec Advanced Technologies
-
LAKE CHARLES, Louisiana
...
ladders. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and
...
-
MasTec Advanced Technologies
-
Duluth, Georgia
...
requires you to climb ladders. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to
...
-
MasTec Advanced Technologies
-
LAKE CHARLES, Louisiana
...
ladders. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and
...
-
MasTec Advanced Technologies
-
COVINGTON, Ohio
...
able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and climb 28-36 foot
...
-
MasTec Advanced Technologies
-
VICTORIA, Texas
...
to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and climb 28-36 foot
...
-
MasTec Advanced Technologies
-
CHARLESTON, South Carolina
...
. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and climb 28
...
-
MasTec Advanced Technologies
-
CHARLESTON, South Carolina
...
. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and climb 28
...
-
MasTec Advanced Technologies
-
WELLSBORO, Pennsylvania
...
ladders. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and
...
-
MasTec Advanced Technologies
-
EATON, Ohio
...
able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and climb 28-36 foot
...
-
MasTec Advanced Technologies
-
PONTIAC, Illinois
...
able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and climb 28-36 foot
...
-
MasTec Advanced Technologies
-
Nashville, Tennessee
...
work, such as digging holes, placing cable, air pipe, and inner duct work in various types of conduit ... poles per system design.
Drive, haul, and/or operate equipment to/from job sites to assist crews in
...
-
MasTec Advanced Technologies
-
BATON ROUGE, Louisiana
...
ladders. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and
...
-
MasTec Advanced Technologies
-
BATON ROUGE, Louisiana
...
ladders. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and
...
-
MasTec Advanced Technologies
-
CHILLICOTHE, Illinois
...
able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and climb 28-36 foot
...
-
MasTec Advanced Technologies
-
SAN ANTONIO, Texas
...
. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and climb 28
...
-
MasTec Advanced Technologies
-
BATH, New York
...
ladders. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and
...
-
MasTec Advanced Technologies
-
CHARLESTON, South Carolina
...
. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and climb 28
...
-
MasTec Advanced Technologies
-
SAN ANTONIO, Texas
...
. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and climb 28
...
-
MasTec Advanced Technologies
-
KALAMAZOO, Michigan
...
equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able ... are not heated or air conditioned, and work may be inside or outside, not dependent of weather
...
-
MasTec Advanced Technologies
-
Roxboro, North Carolina
...
construction work, such as digging holes, placing cable, air pipe, and inner duct work in various types of ... cables on poles per system design.
Drive, haul, and/or operate equipment to/from job sites to assist
...
-
MasTec Advanced Technologies
-
MEMPHIS, Tennessee
...
ladders. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and
...
-
MasTec Advanced Technologies
-
MEMPHIS, Tennessee
...
ladders. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and
...
-
MasTec Advanced Technologies
-
HOUSTON, Texas
...
ladders. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and
...
-
MasTec Advanced Technologies
-
HOUSTON, Texas
...
ladders. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and
...
-
MasTec Advanced Technologies
-
FORT MYERS, Florida
...
ladders. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and
...
-
MasTec Advanced Technologies
-
WEST PALM BEACH, Florida
...
equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able ... are not heated or air conditioned, and work may be inside or outside, not dependent of weather
...
-
MasTec Advanced Technologies
-
ARCADIA, Florida
...
ladders. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and
...
-
MasTec Advanced Technologies
-
MANNING, South Carolina
...
. You must be able to meet manufacturer’s safety requirements on equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able to lift 60-80 pounds and climb 28
...
-
MasTec Advanced Technologies
-
WEST PALM BEACH, Florida
...
equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able ... are not heated or air conditioned, and work may be inside or outside, not dependent of weather
...
-
MasTec Advanced Technologies
-
ORLANDO, Florida
...
equipment used. Candidate’s body weight + 25 lbs of tools/equipment must not exceed 375 pounds.
Be able ... are not heated or air conditioned, and work may be inside or outside, not dependent of weather
...
