Job Information
McDermott Principal Instrumentation Designer in Doha, Qatar
Company Overview:
People power our future. That is why advancing a dynamic, inclusive environment, where everyone grows and thrives is critically important to us.
Our ingenuity fuels daily life. Together, we’ve forged some of the most trusted partnerships across the energy value chain to make what was once just an idea a reality: laying subsea infrastructure thousands of feet below sea level, installing offshore platforms hundreds of miles from shore, and using our expertise to design and build offshore wind infrastructure.
For more than 100 years, we've been making the impossible possible. Today, we're driving the energy transition with more than 30,000 of the brightest minds across 54 countries.
Here, what you do matters.
Job Overview:
The Principal Instrumentation Designer directly impacts the effectiveness of their team and related team. They exchange ideas and information relating to Instrumentation Design effectively. The Principal Instrumentation Designer may work autonomously within established Instrumentation Design procedures and practices. They act as a lead, coordinating the work of others. The Principal Instrumentation Designer proposes improvements to processes and methods within the Instrumentation Design discipline.
Key Tasks and Responsibilities:
Prepare and develop arrangement and detail conceptual, FEED, studies, and detail design drawings of high technical quality and professional consistent presentation ensuring clarity and ease of construction
Develop 3D models and ensure clash-free with other disciplines
Ensure design deliverables are completed and issued per project specifications, MDR, and project Level 2 & 3 procedures, and within agreed schedules and budgets
Apply knowledge and/or skills to a range of activities
Set priorities, organize own work and time to meet objectives, and (as a Lead Designer) forecast and plan resource requirements
When acting as Lead Designer, in addition:
Direct small or medium Instrument Design team as Lead Designer
Lead projects as Lead Designer engaging the participation of other disciplines Coordinate all activities within own discipline and Discipline interfaces with other disciplines
Lead the design team of the assigned work area and complete within the planned schedule and budget, in accordance with standards, MDR, and project-specific procedures and to а high professional standard
Plan, organize, and direct all aspects of Discipline execution on the assigned project including scope, deliverables, schedule, and all Discipline manpower resources - agree on allocations with the Engineering Manager
Ensure interfaces and deliverables are clearly identified
Maintain responsibility progress and productivity, identifying any required corrective action
Act as project-based Discipline point of contact in communications and meetings with the Project Team, Customer, vendor/supplier, and/or subcontractor counterparts; and relevant agencies such as certifying authorities, auditors, third parties, etc.
Become familiar with the Contract Scope of Work, specifications, schedule, and all inter-discipline requirements; including identifying concerns as early as practicable and taking appropriate initiatives to address the issues
Identify changes to scope and promptly raise change notification in the Change Management system, including providing any necessary supporting documentation and estimates Provide similar support for Variation Orders
Interface with all disciplines to develop clash-free designs
Interface with other disciplines to obtain input for Discipline designs and drawings
Liaise with other discipline support groups to ensure clearly defined interfaces, deliverables, and schedules are met
Document substantive communications (communications that result in significant decisions or assignment
of actions), and forward copies to Discipline Lead Designer and Discipline Supervisor
Assist Discipline Lead Designer in preparing estimates for proposals and job scope changes, including execution statements, work schedules, and manhour requirements, identifying software requirements and any other project-specific requirements
Raise technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements
Participate in finalizing deliverables lists, deliverables, and philosophies to ensure compliance with specifications and functional integrity
Review project schedule and fabrication schedule in relation to construction sequence, milestones, and design scope
Attend project kickoff and review meetings, vendor/supplier meetings, engineering and design meetings, and offshore site surveys as required
Research Customer standards and procedures in order to prepare project-specific design procedures
and standards for submission to the Customer for approval
Set up and maintain the Discipline Master design drawing and document files, including final archiving
Prepare and review Discipline deliverables such as:
3D model
Detailed design drawings
As-built drawings
Develop conceptual Layouts based on experience and good offshore engineering practice & develop these through detail design
Assist the Lead Designer in supervising the preparation of key Discipline drawings
Liaise with the responsible Engineers for the timely expediting of Vendor Data to efficiently progress the project according to schedule requirements
Review drawings issued by other disciplines and incorporate the required data into Discipline drawings
Review vendor drawings and documents and incorporate required vendor data into Discipline drawings and documents
Assist in providing necessary design inputs to other disciplines to enable them to proceed with their deliverables
Identify all items for which insufficient data is available to allow the drawing or model to be completed (HOLDS), and list these on the drawing and on the standard 'HOLDS' list form Notify the Discipline Lead Designer when there are updates to the Holds list
Generate IDC design documentation for the project
Perform design verification through single discipline checks (SDC) and/or inter-discipline checks (IDC), providing comments to the Lead Designer
Review all project IDC design documentation for detail technical interfaces
Maintain single discipline and inter-discipline check drawings and filing, including final archiving
Prepare, issue, and update material and weight data take-offs
Assist Fabrication as required in the resolution of construction difficulties relating to design problems, clashes, etc.
Monitor progress and maintain the deliverables register on an ongoing basis
Ensure compliance with the Project Execution Plan and the timely completion and archiving of drawings
and documents
Keep the Lead Designer apprised of all activities, progress, and concerns, including manpower and budgetary-related
Assist in providing inputs for actual, planning, and forecasting progress reports including associated productivity
Prepare forecasting schedules for delayed deliverables
Advise the Lead Designer of problem areas and/or manpower concerns
Report errors and suggest resolutions for the same
Participate in design reviews and audits
Capture lessons learned and enter into MDR's Lessons Learned system
Guide less experienced Designers on MDR and Discipline procedures, standards, worksheets, design calculations, software, technical queries, etc.
Provide leadership, mentoring, and guidance to others
Assist in the maintenance of departmental technical guidelines and standards
Participate in the development and maintenance of Global Procedures, Software, Guidelines, and Standards
Further develop an understanding of MDR's business including processes and procedures
Identify and provide training to staff in specific techniques and proprietary software
Provide information on employee performance to Discipline Supervisor / Engineering Manager
Assist the Discipline Supervisor / Engineering Manager in interviewing job applicants
Prepare/review and (as Lead Designer) approve Instrument Design deliverables such as:
3D model Instrument scopes
Layout drawings
Instrument hook-up / installation details
Wiring/loop diagrams
Panel and console drawings
Instrument drawing lists
Logic Diagrams
Shutdown hierarchy drawings
Schematics and block diagrams
Material schedules
Participate in clash resolution meetings, as required
Travel to fabrication yard or construction site to assist in mechanical completion, hook-up, and/or commissioning, as required
When acting as Lead Designer, in addition:
Act as project-based Discipline point of contact in communications and meetings with Customer, vendor/supplier, and/or subcontractor counterparts; and Project Team
Ensure substantive communications are documented
Prepare bids and project's Discipline design budget and execution plans, updating as required
Identify project staff needs based on knowledge of individual designer's skill sets and provide requests to the Discipline Supervisor / Engineering Manager
Plan, organize, and assign tasks, responsibilities, and manhour budgets to the Discipline team, and verify tasks are completed within budgets
Plan Discipline Level 4 detail deliverable schedule/ register compliant with the overall execution plan
Supervise and guide assigned Designers for Discipline design and design deliverables
Ensure Designers assigned to the project execute assigned tasks in а consistent manner
Prepare working forecasts identifying change management plans, corrective action, and real time schedule
Provide Discipline inputs for actual, planning, and forecasting progress reports including associated productivity
Alert the project team of any deviation from the scope or а need for a change order
Monitor KPI measurement results, and take corrective action as necessary to improve Discipline performance, including performance at interfaces with others
Coordinate with other disciplines' Lead Designers to ensure timely receipt of necessary design inputs
Ensure Discipline Designers have sufficient input information for the drawing or model being undertaken
Raise and approve technical queries to obtain missing information, clarify work scope, and maintain preferred McDermott procedures, specifications, standards, practices, and operational requirements
Review and approve Discipline project:
Schedules
Execution Plans
Deliverable Lists
Deliverables
Forecasts
Estimates
Progress and productivity reports
Procedures
MTO’s
Single discipline checks (SDS) / inter-discipline checks (IDC)
Review comments from Customers & other agencies on documents and drawings produced by the team, and resolve and give guidance on their update and incorporation
Lead the Discipline team during project audits (internal, Customer, and third-party technical audits) and Design Reviews
Assist the Discipline Supervisor / Engineering Manager in the preparation of quarterly forecasts and manpower planning
Anticipate project engineering needs and plan accordingly
Assist the Discipline Supervisor / Engineering Manager, and Project Engineering Manager or Project Manager in the Performance Evaluation of project team members
Ensure Instrument item clashes identified in ЗD model are addressed and resolved
Participate in ЗD model reviews, and ensure Instrument review comments are closed
Travel to the fabrication yard or construction site to assist in mechanical completion, hookup, and/or commissioning, as required
Reports to:
Project: Lead Designer, Project Engineering Manager or Project Manager
Functional: Supervising Designer or Engineering Manager
Liaise With: Lead Designers, Engineers, all other Engineering and Design disciplines assigned to the project, Project Engineer,
Material Control Team, Document Control, and Customer representatives
Supervises: Design team assigned to a project or part of the project during the detailing and production phases
Key Tasks and Responsibilities:
High School graduate with a diploma in Civil, Electrical, or Mechanical Design, or Drafting in a related discipline or equivalent experience
10 years minimum with major contractor or consultant of which 5+ years of experience in predominately oil and gas
Detailed knowledge of associated industry detailing standards & codes Detailed knowledge of 2D and/or 3D drafting and material control systems (AutoCAD and/or MicroStation) Minimum 1 or 2 projects working experience in E3D and/or S3D Capable of Leading projects
Knowledge of QA Systems and good communicator would be an advantage Working experience in project coordination and execution skills Detailed knowledge of AutoCAD and/or Auto Lisp Programming 3D Model creation, Menu, and/or Macro compilation skills
#LI-JG2
McDermott is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, genetic information, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.
McDermott
-
- McDermott Jobs